I have a Ricoh device with fiery controller with blueprint 4.2 and Omega 200 , the system is working fine with the Omega, the problem is how lock the copy screen when using the omega device. i already install the copy link interface. but i need to know what setting in service mode i need to change for that.
Because this setting takes place in service mode on the device you typically need to get the information or have the settings done by a Ricoh service technician. Because there are so many models and continual firmware improvements Pharos can't keep current on the settings nearly as well as the device service teams can. Your best bet is to reach out to them first.