Discover Printers

Document created by on Dec 10, 2014Last modified by Peachy Velasco on Jul 29, 2018
Version 13Show Document
  • View in full screen mode

Once you have completed your Device Scout installation, the Device Scout will be set up for the first time. Your Device Scout will be automatically registered to Beacon and when registration is complete, the Device Scout Discovery screen appears.


Click on the Start Device Scout Discovery button to start the discovery process. The Device Scout will begin scanning your configured IP range(s) for network print devices.


During the Device Scout Discovery process, you will begin to see your devices appear in the window, as shown below.
The green progress bar indicates the number of scanned IP addresses.




When the device discovery process is complete, you will get the message "Your data has been successfully submitted for processing". Click OK. Discovered devices will be automatically uploaded to the Beacon.

You also have the option to upload the scan results to Beacon. Click the upload button in the lower right-hand corner and select "Upload to Server".


Note: Devices pushed to Beacon through the utility will stay in the database and continue to be monitored, even if they are never officially added to a scan range.


Settings here will not be pushed through to Beacon, so this is a good place to test your configuration settings. See Device Scout Discovery Utility for more information.

1 person found this helpful