The MEAP Contents of the engine firmware is critical to proper application operation. Note that this is different from the controller version (although the two numbers are formatted in a similar manner). The MEAP Contents consists of a pair of two digit numbers separated by a dot (for example 34.01).

 

To determine the MEAP Contents of a device:

  • On the front panel press Counter Check.
  • Press the MEAP Counter button.
  • Press the Version Information button.
  • Record the MEAP Contents value.

To determine the Controller version:

  • On the front panel press Counter Check.
  • Press device configuration button
  • Record the controller version.

Note: MEAP Contents are not available using these instructions on Canon imageRunner Advance C2020/C2030 MFPs.

Related: iMFP for Canon - Supported Devices and Firmware